November 4, 2019

The SV-Pre will be in stock this November 15th. Another batch will be made in December.

The Messenger will be in stock sometime in December. An exact date will be posted later.

The Resonant Filter Equalizer will be making a comeback in December. Check the product page later for an exact date.

September 12, 2019

Vacation Notice: all orders placed after 4PM EST will be fulfilled after September 24th.

September 3, 2019

The SV-Pre is scheduled to be back in stock on September 12th. The Synth Voice Deluxe will be released after this, either at the end of September or early October. The Super Stack will follow these releases.

A vacation notice will be posted on the website on September 13th. Orders placed between September 13th - 23rd will ship after the 24th.

June 17, 2019

The Rumblefish Fuzz will be released on June 28th. Following this in July will be the Resound reverb, and then the SV-Pre.

Later this summer will be the release of the Electronic Tube Direct Injection, the Super Stack, and the Synth Voice Deluxe.

The release dates will be added to the product pages as the dates get closer. Check back regularly for updates.

May 16, 2019

I will be taking next week off, so any orders placed after 3PM this Friday will be shipped on or after May 27th.

Production of the Messenger, HPF-DI, and Filter FX Loop are well under way. The product pages indicate the dates these go up for sale.

June will have two new small batch releases. First will be a preamp of the Traynor TS-50B bass amp. It will be in a 125B enclosure with top jacks, and will take 9V DC. I built the prototype and it is excellent! It is a very grindy, cutting solid state preamplifier. It can even drive a power amp!

The second small batch release for June will be a re-release of the Rumblefish fuzz.

Stay tuned for more stuff.

April 25, 2019

To make room for more builds in the future, the PLL will no longer be stocked after they are sold out. This will be the final stock.

The Resonant Filter EQ batch is nearly complete. It will be made available as early as next week.

The Messenger and SV-Pre will be restocked on May 10th.

The HPF-DI will be made available later in May, followed by the Filter FX Loop shortly after.

Stay tuned for a lot more small batch builds!

March 26, 2019

The batch of Super Stacks is still in progress. They are a bit slow to make, but I plan to have them ready in about three weeks. 

After this I will release the Resonant Filter EQ, a L+HPF with resonant cutoff frequencies, as well as a mid band EQ. This type of EQ allows unique sculpting of the lows and highs, similar to what a cab sim can do. This type of EQ can be found in some high end custom basses such as Alembic and Wal.

February 19, 2019

I have updated the FAQs to include info regarding the P15.

The Super Stack is in production and will be made available in the next few weeks. I will give a heads up when an exact date is known.

The parts for the Locust Star are on their way to me, and I will have them ready in March. This will likely be the last batch that I make of this pedal.

January 14, 2019

The production of the SV-Pre has been delayed due to the enclosures being lost in the mail. The manufacturer has issued a redo of the order and should be able to get it out to me in a couple of weeks. I plan to release the SV-Pre sometime in February.

Along with this, I am building up an inventory of Super Stacks to be released as a small batch soon. I also have quite a few other small batches lined up behind it, so stay tuned for more fun stuff!

December 13, 2018

I've been working hard building inventory on out of stock items. The Always On HPF is finally back in stock! Also, the Messengers are ready to be posted tomorrow.

In addition, I have placed the Terraformer, Bass Box, and Sunder Fuzz on sale for December. Get one before they're sold out!

December 5, 2018

The Always On HPF and Messenger will be in stock on December 14th! Finally!

I'm only making a handful of Messengers right now as I have so many different pedals to build. There are parts to make more if they sell out.

The SV-Pre will be on sale this Friday. I have parts on order to make more, and will likely be ready sometime in January.

I'm still waiting on PCBs for the L+HPF and the Silver Deluxe, and I expect them to arrive in about two weeks.

November 21, 2018

The Always On HPF was originally scheduled to be in stock on November 23rd, but it is obvious that this will not happen as I still have not received supplies I ordered several weeks ago. The Canada Post strike continues to delay my supplies from arriving and I can no longer give estimates on when products will be back in stock. As soon as I have more information, I will post it here and on the product pages. Thanks for your patience. Hopefully this will end soon!

November 19, 2018

Due to the Canada Post strike, I have not received any packages for two weeks. The restock date for the Always On HPF may have to be postponed if supplies do not arrive soon. I will update the product page and post here with any changes.

November 12, 2018

Dates have been updated on the out of stock items. The Always On HPF and the Silver Deluxe will be ready on November 23rd, and the Messenger will be ready on November 30th.

The first JFET SVT will be made this weekend as a final proof of concept. If everything goes according to plan, I will get started on making these right away and will have them ready in November.

I have plans to release a new pedal in December as well as some end of the year sales in time for the holidays. Stay tuned for a newsletter for this!

October 10, 2018

The Always On High Pass Filter has been in high demand lately and sold out sooner than anticipated. Replacement parts are on the way and should be here by next week.

The parts for the SVT pre should also be here next week, and I'll have them built in approximately a week after that. I won't release a newsletter for this, but I'll give more updates on when it's coming. As always, no pre-orders or wait lists!

October 5, 2018

The HPF is back in stock!

It is a long holiday weekend so I may not be able to answer emails until next week. Until then I will be working on finishing up the phaser for the PCDH19 Alliance auction to be held in November.

JB

October 4, 2018

The parts for the HPF have arrived and production has commenced. I will have a few available tomorrow, and more next week.

October 1, 2018

I am expecting the final pieces for the HPF to arrive this week. I hope to have started on building up inventory by this weekend. Check back later this week for updates on this.

The next small batch pedal I will be launching is a JFET implementation of the 70s SVT preamp. This should be released later this month. As a reminder, I don't take pre-orders, nor do I keep a list of potential buyers for any of my pedals. You'll just have to stay tuned for when it is released!

Soon I will put up a product page of the phaser I made for the PCDH19 Alliance Auction, which will be held sometime in November. This is a one-off pedal that is only available at the auction, and all money raised goes towards funding research to find a cure for PCDH19 epilepsy. More details on the pedal and the auction will be available when the product page is made.

In addition to all this, I have plans for two more small batches this year, and then a few more regular items to be launched for 2019.

JB

September 24, 2018

I added the Silver Deluxe to the product line-up. It will be a limited production run. I may make more if there is more demand, but for now I have a few other small batches coming up that I will be building.

The parts for the HPF and the Messenger are still incoming, so it will still be a few weeks before these are available. I will keep up the updates on these builds.

September 18, 2018

I have added this page to give more regular updates on current and upcoming products.

This week I will be adding my new preamp for sale. I anticipate they will sell fast, so check regularly if you want one. I have parts on order to make more, but please be patient as they take a long time to make. I will do my best to make as many as possible while keeping up inventory of the other pedals.

Another newsletter will go out with the release of the preamp. It will include a peek at future releases of Broughton products. If you haven't already, subscribe by filling out the form at the bottom of any product page.

Due to a delay in manufacturing of the High Pass Filter pedal, they will be out of stock until the error can be corrected. I anticipate they will be available in early October. Of course you can always grab an Always On version, or the Low + High Pass Filter, both of which share the same HPF circuitry as the standalone version.

That is all for now. Back to making more pedals...

JB

©2019 Broughton Audio - Hand made effect pedals

Contact